38195 Main Plot Control MPC: The gc mainscan shift is too small Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 When imaging the gc mainscan shift tells the firmware where the calibrated start of plate is. However due to rotation and track profile firmware will often have to start imaging before this absolute point. Imaging cannot occur if all the associated corrections result in a "negative" imaging starting point. If this occurs, this error message is returned. Retry the job, if it still fails, restart the device and call Kodak Service. This error is reported. Improperly calibrated GC parameters Encoder index not aligned properly. Index should occur in a deadband area of the drum (i.e location where imaging does not occur). 28-Aug-2006 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:11 2008 PST